Wlan And Maintenance Settings; Logging In To The Web Configurator In Ap Mode - ZyXEL Communications ZyXEL NBG420N User Manual

LABEL
Apply
Reset

5.4.2 WLAN and Maintenance Settings

The configuration of wireless and maintenance settings in AP Mode is the same as for Router
Mode.
• See Chapter 5 on page 69
• See Maintenance and Troubleshooting (227)
Maintenance settings.

5.5 Logging in to the Web Configurator in AP Mode

1 Connect your computer to the LAN port of the NBG420N.
2 The default IP address if the NBG420N is "192.168.1.1". In this case, your computer
must have an IP address in the range between "192.168.1.2" and "192.168.1.255".
3 Click Start > Run on your computer in Windows.
4 Type "cmd" in the dialog box.
5 Type "ipconfig" to show your computer's IP address. If your computer's IP address is
not in the correct range then see
your computer's IP address.
6 After you've set your computer's IP address, open a web browser such as Internet
Explorer and type "192.168.1.1" as the web address in your web browser.
See Chapter 6 on page 73
NBG420N User's Guide
DESCRIPTION
Click Apply to save your changes to the NBG420N.
Click Reset to reload the previous configuration for this screen.
for information on the configuring your wireless network.
Appendix D on page 293
for a tutorial on setting up a network with an AP.
Chapter 5 AP Mode
for information on the configuring your
for information on changing
71