Table of Contents
Advertisement
Prestige 100MH Quick Start Guide
Chapter 4
Windows NT Quick Start
This chapter shows you the step-by-step instructions to configure your Windows NT
workstations for Internet access.
4.1
TCP/IP Installation
You must first install TCP/IP protocol on each Windows NT workstation before you can use it
to access the Internet. If you have already installed TCP/IP, skip to the TCP/IP Configuration
section on page 15; otherwise, follow these steps:
Step 1. From the
, select
then open
.
Start Menu
Settings
Control Panel
Step 2. Double-click the
icon to open the
control panel.
Network
Network
Step 3. Select the
tab, then click the
button.
Protocols
Add...
15
Advertisement
Table of Contents
