Windows 95 Quick Start; Tcp/Ip Installation - ZyXEL Communications ZyXEL Prestige 100MH Quick Start Manual

This chapter shows you the step-by-step instructions to configure your Windows 95
workstations for Internet access.
3.1

TCP/IP Installation

You must first install TCP/IP protocol on each Windows 95 workstation before you can use it to
access the Internet. If you have already installed TCP/IP, skip to the TCP/IP Configuration
section on page 9; otherwise, follow these steps:
Step 1. From the
Step 2. Double-click the
Step 3. Click the
, select
Start Menu
icon to open the
Network
button in the
Add Network

Windows 95 Quick Start

then open
Settings
Network
control panel to add a new protocol.
Prestige 100MH Quick Start Guide
Chapter 3
.
Control Panel
control panel.
7