2. Instructions for invoking the update(s) – To perform an update, the fol-
3. Limitations
Integration Guide
lowing instruction is executed from the command line:
C:\<path> cfirmwareupdate <scanner_name> <"path:file-
name">
Where:
<path> = the location on the tablet where the Datalogic
utilities are installed
<scanner_name> = IntegratedImagingBarcodeScanner
<"path:filename"> = the path to the update file+update
file name
• The module must be in USB-COM or Composite interface; updates
are not possible when the module is in the USB KB interface.
• The module should not be in use by any application. Performing an
update to the scan module should only be done when the module is
not actively being used by an application.
• The module should be in an idle state.
15