Table of Contents
Advertisement
20.3 General control of a device or group
To control a configured device, tap the relevant device/
group in the selection list on the UNDOK home page.
This takes you to the product's playback screen; the
following functions are available:
1
2
3
4
5
Picture 2
1
Open the home page (all audio systems)
Selection of the various sources (dependent on
2
the active device/the devices in the group)
Open the favourites list (storing and selecting
3
favourites)
4
Share current station
7
5
Volume control for the group or active device
8
Advanced settings (equaliser/date/factory
6
settings, dependent on the device)
9
7
Switch device/group to standby
8
Browse current source
9
Playback screen of the device/group
Display the function buttons (Play, Next,
10
Previous), dependent on the source
Volume control for the individual devices of a
11
multi-room group
20.4 Creating/managing multi-room groups
If there are several multi-room-enabled devices in your
network, they will appear in the selection list with a +
symbol after their name.
The device that you have selected in the list by tapping
10
the
icon will be the master when the group has been
created. This means that audio being played on the master
is continued in the group.
11
Once you have tapped the icon, a screen appears in which
all compatible devices are listed. Tap each of the devices
you would like to have in the group, and confirm your
selection with Done.
41
Advertisement
Table of Contents
