Profile Blades - ABI Attachments TR3-E Series Owner's Manual

Profile Blades

The profile blades are used on the Equine and Trevor
Brazile units and can operate at a depth of up to 4" and are
adjustable at ½" increments. This attachment cuts parallel
to the arena grade, while riding along just above the base,
to remove dangerous compaction layers and aerify the
footing. This creates a sheet of loose material. The grooming
rods are then able to break up the loose material as it flows
through the tool. The Profile Blade attachment ensures that
what the horse and rider see on the top surface, is also what
the horse feels when his hooves penetrate into the footing
material. It is important to remember that the profile blades
are used for grooming, not the renovation of the arena.
The Profile blades are optional on the Property Edition. Use
after scarifying in gravel applications, as a part of our "gravel
resurfacing system".
See pages 21-23 for Profile Blade setup depth guide.
Email: support@abiattachments.com Call Toll Free: 877-788-7253
19