Gage Wheels (Tires) - ABI Attachments TR3-E Series Owner's Manual

• Then, adjust from there to achieve desired surface finish
look. Adjustments may be needed accounting for moisture
changes or vegetation growth in the material.

Gage Wheels (tires):

The wheels have three operating positions:
The bottom hole on the axle block is the standard operation
position for general arena maintenance.
The center hole will lower the frame deeper into the
material for more aggressive grading ideal for renovation
work and can be used for arena and driveway renovation.
When the wheel location is changed, adjustments may be
needed to the leveling blade.
The top hole is for aggressive ripping. This setting will
allow the greatest amount of depth. When the wheel
location is changed, adjustments may be needed to the
leveling blade.
NOTE: The operating positions of the wheels can be pinned
higher on one side than the other in addition to adjusting the
tractor 3pt hitch for crowning driveways or creating drainage
swales to remove water.
Visit: www.abisupport.com
12