Scarifying Teeth (Ripping Teeth); Bolt On Scarifier Tips - ABI Attachments TR3-E Series Owner's Manual

Scarifying Teeth (Ripping Teeth)

The scarifying teeth loosen the ground to eliminate
hard spots and easily penetrate compacted arena
footing and gravel driveway material or soil. They
are primarily used to break up compaction and can
be used in conjunction with the leveling blade and
the finish rake. During daily arena maintenance, the
scarifiers can be pinned up and out of play. Excess wear
will be created by using them during daily grooming.
See pages 21-23 for Scarifier Teeth setup depth guide.

Bolt On Scarifier Tips

The TR3-E units have replaceable bolt on tips on the
scarifying teeth. This feature not only ensures affordable
and easy maintenance of this wear part, but also ensures
peak ground penetration no matter the ground condition.
If the tips wear to the point that performance is diminished,
simply replace them, restoring optimal performance.
Leveling Blade
The leveling blade can be used as an auto-leveling device when it is in the float position [no pins to lock it into position] (see
Figure 9). If the blade is carrying too much material, it can be pinned higher by inserting the pins in the upright tower underneath
the handle of the leveling bar (see Figure 10). It can also be locked into place by using the adjustment pins above the bar to create
a box blade on the tool (see Figure 11).
Figure 9.
Visit: www.abisupport.com
Bolt on Scarifier Tip
Figure 10. Leveling blade
limited in down direction
by pinning below the arms.
18
Figure 11. Leveling blade locked
in place by pinning above and
below the arms (2nd Hitch Pin P/N
10-20230 and 2nd Linch Pin P/N
10-20232 are optional and can be
ordered thru customer service).