KTM 390 Adventure 2020 Owner's Manual page 193

–
Pull the rear wheel back and mount wheel spindle
washer and chain adjuster
Guideline
Mount left and right chain adjusters
tion.
–
2
Mount nut
–
Push the rear wheel forward so that the chain adjusters are in
contact with the screws, and tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
Nut, rear wheel spin-
dle
–
Position wheel speed sensor
–
Mount and tighten screw
F00861-12
Guideline
Screw, wheel speed
sensor holder
4
.
4
in the same posi-
and the washer.
2
M14x1.5 100 Nm
(73.8 lbf ft)
5
in the hole.
6
.
M6 8 Nm (5.9 lbf ft)
WHEELS, TIRES 15
3
with the
.
B
.
191