ZyXEL Communications P-334WT Quick Start Manual page 17

For example, set the speed to 1000 Kbps (or less) if the broadband device connected to the WAN port has an upstream
speed of 1000 Kbps.
Use the second wizard screen to select the services that you want to apply bandwidth management.
2.
The third wizard screen allows you to setup priorities for the services listed.
3.
P-334WT
Select the Active check box to have
the Prestige apply bandwidth
management to traffic going out
through the Prestige's WAN, LAN or
WLAN port.
Enter the amount of Managed
Bandwidth in kbps (2 to 100,000) that
you want to allocate for traffic. 20 kbps
to 20,000 kbps is recommended. The
recommendation is to set this speed to
be equal to or less than the speed of
the broadband device connected to the
WAN port.
Apply bandwidth management by
selecting services from the list provided.
Click Next to continue.
17