This chapter describes how to access the ZyAIR web configurator and provides an overview
of its screens. The default IP address of the ZyAIR is 192.168.1.1.
2.1 Web Configurator Overview
The embedded web configurator (ewc) allows you to manage the ZyAIR from anywhere
through a browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet
Explorer 6.0 and later or Netscape Navigator 7.0 and later versions with JavaScript enabled. It
is recommended that you set your screen resolution to 1024 by 768 pixels. The screens you see
in the web configurator may vary somewhat from the ones shown in this document due to
differences between individual firmware versions.
2.2 Accessing the ZyAIR Web Configurator
1 Make sure your ZyAIR hardware is properly connected and prepare your computer/
computer network to connect to the ZyAIR (refer to the Quick Start Guide).
2
aunch your web browser.
L
3
"192.168.1.1" as the URL.
Type
4
"1234" (default) as the password and click Login. In some versions, the default
Type
password appears automatically - if this is the case, click Login.
5
should see a screen asking you to change your password (highly recommended) as
You
shown next. Type a new password (and retype it to confirm) and click Apply or click
Ignore.
Chapter 2 Introducing the Web Configurator
C
Introducing the Web
Note: If you do not change the password, the following screen
appears every time you login.
ZyAIR G-2000 Plus User's Guide
H A P T E R
Configurator
2
44