ZyAIR G-2000 Plus User's Guide
Figure 41 MAC Address Filter
The following table describes the labels in this menu.
Table 31 MAC Address Filter
LABEL
Active
Filter Action
Set
MAC Address Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the wireless station that
Apply
Reset
113
DESCRIPTION
Select Yes from the drop down list box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny Association to block access to the ZyAIR, MAC addresses not listed will
be allowed to access the ZyAIR
Select Allow Association to permit access to the ZyAIR, MAC addresses not listed will
be denied access to the ZyAIR.
This is the index number of the MAC address.
are allowed or denied access to the ZyAIR in these address fields.
Click Apply to save your changes back to the ZyAIR.
Click Reset to reload the previous configuration for this screen.
Chapter 7 Wireless Security