Setting Up Your Computer's Ip Address - ZyXEL Communications ISDN Internet Access Router 202H Plus Quick Start Manual

LED COLOR
PWR/SYS Green
Red
LAN 1-4 Green
Amber
ISDN LNK Green
ISDN B1, B2 Green
Phone 1-2 Green

3 Setting Up Your Computer's IP Address

Skip this section if your computer is already set up to accept a dynamic IP address. This is
The Prestige is already set up to assign your computer an IP address. Use this section to set up your computer to receive
an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range with a subnet mask of
255.255.255.0. This is necessary to ensure that your computer can communicate with your Prestige.
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed on computers
using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.
Prestige 202H Plus Quick Start Guide
STATUS
On The Prestige is receiving power and functioning properly.
Blinking The Prestige is rebooting.
On Power to the Prestige is too low.
Off The system is not ready or has malfunctioned.
On The Prestige has a successful 10Mb Ethernet connection.
Blinking The Prestige is sending/receiving data.
On The Prestige has a successful 100Mb Ethernet connection.
On The ISDN link is connected to an ISDN switch and ready to send or receive
data.
Off The ISDN link is not connected to an ISDN switch or has not yet initialized.
On The ISDN B1(B2) line is sending or receiving data.
Off The ISDN B1(B2) line is not sending or receiving data..
On The telephone(s) connected to this port is (are) in use.
Blinking The telephone(s) connected to this port is (are) ringing.
Off The telephone(s) connected to this port is (are) not in use.
the default for most new computers.
DESCRIPTION
5