Nikon Z 50 Reference Manual page 504

1 Lens hood*
2 Lens hood lock mark
Lens hood alignment
3
mark
Lens hood mounting
4
mark
5 Zoom ring
6 Focal length scale
7 Focal length mark
8 Control ring
9 Lens mounting mark Use when mounting the lens on the camera.
10 CPU contacts
11 Front lens cap
12 Rear lens cap
* Available separately.
476
Technical Notes
Lens hoods block stray light that would
otherwise cause flare or ghosting. They also
serve to protect the lens.
Use when attaching the lens hood.
Rotate to zoom in or out. Be sure to extend the
lens before use.
Determine the approximate focal length when
zooming the lens in or out.
Autofocus mode selected:
In autofocus mode, rotate the ring to adjust a
setting such as Focus (M/A) or Aperture
assigned using the camera. For more
information, see the description of Custom
control assignment/Custom controls
(shooting) in the camera manual.
Manual focus mode selected:
Rotate the ring to focus.
Used to transfer data to and from the camera.
—
—
➜
NIKKOR Z DX 50–250mm f/4.5–6.3 VR Lens User's Manual