Nikon Z 50 Reference Manual page 137

Option
Auto slow sync: As for "slow sync", except that the flash
t
fires only as required.
Auto slow sync + red-eye: As for "slow-sync + red-eye",
u
except that the flash fires only as required.
s
Flash off: The flash does not fire.
D
Lowering the Built-In Flash
To save power when the flash is not in use,
press it gently downward until the latch
clicks into place.
D
Using the Built-In Flash
• Remove lens hoods to prevent shadows.
• If the built-in flash is used with continuous low-speed or continuous
high-speed selected for release mode, only one picture will be taken
each time the shutter-release button is pressed. Selecting continuous
high-speed (extended) enables burst photography and disables the
built-in flash.
• The shutter release may be briefly disabled to protect the flash after it
has been used for several consecutive shots. The flash can be used
again after a short pause.
Description Available in
o
o
b, P, S, A,
M, k, p,
n, o, s,
f, V, T,
U, 5
Shooting Controls
109