F4: Customize Command Dials - Nikon Z 50 Reference Manual

f4: Customize Command Dials

Customize the operation of the main and sub-command dials.
• Reverse rotation: Reverse the direction of
rotation of the command dials for
selected operations. Highlight options
and press 2 to select or deselect, and
then press J to save changes and exit.
• Change main/sub: Choose the roles played by the command dials
for exposure and focus operations.
- Exposure setting: If On is selected, the main command dial will
control aperture and the sub-command dial shutter speed. If
On (Mode A) is selected, the main command dial will be used
to set aperture in mode A only.
- Autofocus setting: This option applies to the control assigned
Focus mode/AF-area mode using Custom Setting f2
(Custom controls (shooting)). If On is selected, the focus
mode can be chosen by keeping the control pressed and
rotating the sub-command dial, AF-area mode by keeping
the control pressed and rotating the main command dial.
294 Menu Guide > A Custom Settings
G button ➜ A (Custom Settings menu)