Table of Contents
Advertisement
A
Preventing Blur
Use a tripod to prevent blur caused by camera shake at slow shutter
speeds.
A
Special Effect Modes
• NEF (RAW) image quality options cannot be selected in 4, V, T, U,
5, 6, and 7 modes.
• Some settings—for example, AF-area mode, Picture Controls, or
white balance—cannot be changed depending on the mode
selected.
• In U and 6 modes, the shooting display refresh rate will drop.
❚❚ Adjusting U (Photo Illustration) Settings
To adjust line thickness, select U in
special effects mode and then press J.
• Press 4 to thin outlines or 2 to make
them thicker.
• Press J to save changes; the selected
effect will be applied during shooting.
❚❚ Adjusting 5 (Toy Camera Effect) Settings
To adjust settings, select 5 in special
effects mode and then press J.
• Press 1 or 3 to highlight the desired
setting.
• Vividness: Press 2 for more saturation, 4
for less.
• Vignetting: Press 2 for more vignetting, 4 for less.
• Press J to save changes; the selected effect will be applied
during shooting.
96 Shooting Controls
Advertisement
Table of Contents
Troubleshooting
