Table of Contents
Advertisement
4. The Advanced Settings dialog box will now be displayed. Click on the
COM Port Number drop down box to check what other port numbers are
available. If, for instance, Windows has assigned COM5 to the device, you
may try to reassign it to a lower unused port number. Click OK when
finished. Try running HyperTerminal to test whether the new port number
is OK.
Note:
Some software programs may only support Ports up to COM4 and
may not work if the port is assigned to COM5 or higher.
5. Once you have verified that the device has been properly installed, you
may now proceed to use the USB-to-RS232 Converter to connect to serial
devices. Attach the serial device to the serial port of the adapter and then
connect the USB connector to the USB port of your computer. Use the
supplied driver for the serial device if needed.
7000 Bus Converter User's Manual (Version 1.8 Jan/2006, 7PH-006-18) --------------- 33
Advertisement
Table of Contents
