Husqvarna K 970 III, K 970 III Rescue, K 970 SmartGuard Operator's Manual page 5

Product overview K 970 SmartGuard
1
5
4
3
2
12
13
1. Operator's manual
2. Air filter cover
3. Information and warning decal
4. Decompression valve
5. Front handle
6. Blade guard
7. SmartGuard handle
8. Cutting head
9. Belt tensioner
10. Cutting arm
11. Fuel tank cap
12. Water connection with filter
13. Start instruction decal
14. Stop switch
15. Air purge bulb
16. Throttle trigger
17. Throttle trigger lockout
18. Type plate
19. Choke control
20. Cutting equipment decal
21. Cutting blade (not supplied)
22. Flange, spindle, arbor bushing
23. SmartGuard
24. Adjustment handle for blade guard
25. Water hose
26. Water valve
27. Rear handle
28. Starter rope handle
29. Starter housing
1429 - 001 - 16.04.2020
7
6
9
14
10
15
11
23
22
8
21
19
18
17
16
30. Combination wrench
31. Water connector GARDENA
Symbols on the product
24
25
20
29
28
31
30
®
WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
Personal protective
protection. Refer to
equipment on page 9 .
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
WARNING! Kickbacks can be sudden, rapid
and violent and can cause life threatening
injuries. Read and understand the
instructions in the manual before using the
Kickback on page 18 .
product. Refer to
26
27
5