Function Of Operating Elements - GLW CS 60 Operating Manual

DESCRIPTION

Function of operating elements

1 Rotary knob
pull-off length
2 Rotary knob
diameter
3 Rotary knob
stripping length
4 Start button
5 LC display
6 Waste tray
(protective hood)
7 Carrying handle
8 Centering aid
9 Reset button
10 On/off switch
11 Mains fuses
12 Power connector
08/2012
For setting the pull-off length. If the value is greater than
the stripping length, the remaining insulation is pulled
completely off the cable. If the value is smaller, part is
pulled off.
For setting the conductor diameter.
(cutting depth)
For setting the stripping length.
The start button is pressed by the cable and the stripping
is started.
Display of settings, messages and errors.
Acts as a protective hood and simultaneously collects
waste insulation.
For convenient transport of the stripper.
Assists the centering of thin wires
To reset the piece counter and acknowledge messages or
entries.
Switches the power supply on and off. After switch-on, the
LC display is illuminated.
Microfuses (2 pcs.) integrated in the power connector.
Device coupler for power cable.
6