Safety; Basic Information; General Safety Notices - GLW CS 60 Operating Manual

SAFETY

Basic information

The basic requirement for safe, failure-free operation of the CS 60 is that the safety information is
noted and observed.
It's a question of your safety!
The safety information must be observed by all persons working with the CS 60.
In addition, the rules and regulations applicable to the site of operation, particularly those
concerning accident prevention, must be observed.
Symbols
The following symbols are used in this manual:
Indicates a potential risk of accident and injury or potential damage to the CS 60.
Indicates correct use or setting.
Indicates information for use.

General Safety Notices

The CS 60 is constructed according to recognised safety rules.
It is equipped with protective devices.
Nevertheless, in case of maloperation or misuse, risk is posed to
 life and limb of the operator,
 the machine.
The CS 60 is to be used only
 for its intended use and
 in flawless condition as regards safety requirements.
All persons involved in the initial operation of the CS 60, operating and maintaining it, must
 have the appropriate qualifications and
 follow this manual closely.
08/2012 1