Teka MB 620 BI User Manual page 42

 Is the dish coming into contact with the
walls of the cavity?
 Are there loose skewers or spoons inside
the microwave?
The inside lighting does not come on:
 If all of the functions are operating
correctly, the bulb is probably blown. You
may continue to use the appliance.
 The light bulb may only be replaced by
the Technical Support Service.
Specifications

AC voltage ................................................................................... (See rating plate)

Fuse. ........................................................................................... 12 A / 250 V

Power required ............................................................................ 1200 W

Grill power. .................................................................................. 1050 W

Microwave output power. ............................................................ 800 W

Microwave frequency... ............................................................... 2450 MHz
 Outer dimensions (WAD). ....................................................... 595  390  325 mm
 Cavity dimensions (WAD). ...................................................... 305  210  280 mm

Oven capacity. ............................................................................ 18 l

Weight ......................................................................................... 18,6 kg
Disposal of the packaging
The packaging bears the Green Point mark.
Dispose of all the packaging materials such
as cardboard, expanded polystyrene and
plastic wrapping in the appropriate bins. In
this way you can be sure that the packaging
materials will be re-used.
Disposal of equipment no longer used
According to European Directive 2012/19/EU
on the management of waste electrical and
electronic equipment
electrical appliances should not be put into
the normal systems for disposal of solid
urban waste.
(WEEE), home
The power cable is damaged
 The power cable must be replaced by the
manufacturer,
technicians that are qualified to perform
this task, in order to avoid dangerous
situations and because special tools are
needed.
If any other type of fault is noticed, contact
the Customer Support Service.
All repairs must
specialised technicians.
Outdated appliances should be collected
separately to optimise component material
recovery and re-cycling rates and to prevent
potential harm to human health and the
environment. The symbol of a rubbish
container superimposed by a diagonal cross
should be put on all such products to remind
people of their obligation to have such items
collected separately.
Consumers should
authorities or point of sale and request
information on the appropriate places to
leave their old home electrical appliances.
authorised agents
be performed
contact their
or
by
local