How To Set Up Available Bandwidth On Ethernet Interfaces; How To Configure The Load Balancing In The Wan Trunk; Figure 100 Network > Interface > Ethernet > Edit (Wan1) - ZyXEL Communications 200 Series User Manual

Unified security gateway

Hide thumbs Also See for 200 Series:

Table of Contents

You do not have to change many of the ZyWALL's settings from the defaults to set up this

trunk. You only have to set up the bandwidth on wan1 and wan2 and change the algorithm that

WAN_TRUNK uses.

6.6.1 How to Set Up Available Bandwidth on Ethernet Interfaces

1 Click Network > Interface > Ethernet and the wan1 Edit icon. Enter the available

bandwidth (1000 kbps) in the Egress Bandwidth field. Click OK.

Figure 100 Network > Interface > Ethernet > Edit (wan1)

2 Click the Edit icon for wan2, and enter the available bandwidth (512 kbps) in the

Egress Bandwidth field. Click OK.

1 Click Network > Interface > Trunk. Click the Edit icon next to WAN_TRUNK.

2 In the Load Balancing Algorithm field, select Weighted Round Robin. After the

screen refreshes, enter 2 and 1 in the Weight column for wan1 and wan2, respectively.

ZyWALL USG 100/200 Series User's Guide

Chapter 6 Tutorials

Zywall usg 100 series