Vpn Advanced Wizard - Summary; Vpn Advanced Wizard - Finish - ZyXEL Communications 200 Series User Manual

Unified security gateway

Hide thumbs Also See for 200 Series:

Table of Contents

Chapter 4 Wizard Setup

Table 21 VPN Advanced Wizard: Step 5 (continued)

4.8.8 VPN Advanced Wizard - Summary

This summary of VPN tunnel settings is read-only.

Name: Identifies the VPN connection (and the VPN gateway).

Secure Gateway: IP address or domain name of the peer IPSec device.

Pre-Shared Key: VPN tunnel password.

Local Policy: IP address and subnet mask of the computers on the network behind your

ZyWALL that can use the tunnel.

Remote Policy: IP address and subnet mask of the computers on the network behind the peer

IPSec device that can use the tunnel.

Copy and paste the Remote Gateway CLI commands into another ZLD-based ZyWALL's

command line interface.

Click Save to save the VPN rule.

Now you can use the VPN tunnel.

This is a (static) IP address and Subnet Mask on the network behind the remote

IPSec router.

These commands set the matching VPN connection settings for the remote gateway.

If the remote gateway is a ZLD-based ZyWALL, you can copy and paste this list into

its command line interface in order to configure it for the VPN tunnel.

You can also use a text editor to save these commands as a shell script file with a

".zysh" filename extension. Then you can use the file manager to run the script in

order to configure the VPN connection.

See the commands reference guide for details on the commands displayed in this

Click Save to store the VPN settings on your ZyWALL.

ZyWALL USG 100/200 Series User's Guide

Zywall usg 100 series