Pptp: Static Ip Address Assignment; Figure 27 Pptp Encapsulation: Static; Table 12 Pptp Encapsulation: Static - ZyXEL Communications 200 Series User Manual

Chapter 4 Wizard Setup

4.3.8 PPTP: Static IP Address Assignment

If you select Static as the IP Address Assignment, the following screen displays.

Figure 27 PPTP Encapsulation: Static

The following table describes the labels in this screen.

Table 12 PPTP Encapsulation: Static

LABEL
ISP Parameters
Encapsulation
User Name
Password
Retype to Confirm
Nailed-Up
Idle Timeout
PPTP
Configuration
Base Interface
Base IP Address
IP Subnet Mask
Server IP
88
DESCRIPTION
This displays the type of Internet connection you are configuring.
Type the user name given to you by your ISP. You can use alphanumeric and -
_ @$./ characters, and it can be up to 31 characters long.
Type the password associated with the user name above. Use up to 64 ASCII
characters except the [] and ?.
Type your password again for confirmation.
Select Nailed-Up if you do not want the connection to time out.
Type the time in seconds that elapses before the router automatically
disconnects from the PPTP server.
This displays the identity of the Ethernet interface you configure to connect with a
modem or router.
Type the (static) IP address assigned to you by your ISP.
Type the subnet mask assigned to you by your ISP (if given).
Type the IP address of the PPTP server.
ZyWALL USG 100/200 Series User's Guide