Service Control Rules; Figure 498 System > Service Control Rule Edit - ZyXEL Communications 200 Series User Manual

Table 238 System > WWW (continued)
LABEL
#
Zone
Address
Action
Add icon
Authentication
Client
Authentication
Method
Apply
Reset

43.6.5 Service Control Rules

Click Add or Edit in the Service Control table in a WWW, SSH, Telnet, FTP or SNMP
screen to add a service control rule.
Figure 498 System > Service Control Rule Edit
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
This is the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the ZyWALL's (non-configurable)
default policy. The ZyWALL applies this to traffic that does not match any other
configured rule. It is not an editable rule. To apply other behavior, configure a rule
that traffic will match so the ZyWALL will not have to use the default policy.
This is the zone on the ZyWALL the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is allowed or
denied to access.
This displays whether the computer with the IP address specified above can access
the ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).
Click the Add icon in the heading row to open a screen where you can add a new
rule. Refer to Table 239 on page 682
Click the Edit icon to go to the screen where you can edit the rule.
Click the Add icon in an entry to add a rule below the current entry.
Click the Delete icon to remove an existing rule. A window display asking you to
confirm that you want to delete the rule. Note that subsequent rules move up by one
when you take this action.
Click the Move to N icon to display a field to type a number for where you want to
put that rule and press [ENTER] to move the rule to the number that you typed.
Select a method the HTTPS or HTTP server uses to authenticate a client.
You must have configured the authentication methods in the Auth. method screen.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 43 System
for information on the fields.
681