LOXONE Weather Station Tree Quick Manual page 2

About the product
The Weather Station Tree measures wind, rain, brightness and
temperature. You can use this data for a variety of functions
throughout your application.
Features
• Wind sensor
• Wind alarm
• Rain sensor
• Brightness sensor
• Temperature sensor
Information
Please note that the temperature sensor may not always
accurately record the external temperature. This is due to
direct sunlight warming the housing, which can in fluence the
temperature reading. Always select an installation place that's
suitable for the application.
Installation
We suggest you install the weather station in a place where
wind, rain and brightness can be detected without interference.
Install and connect the device as shown, either on a pole or
directly on the wall, with the provided accessories. Please note
that buildings or objects in close proximity to the Weather
Station could cause air turbulence which may influence the
accuracy of wind measurements.
For additional information, declaration of confirmity,
visit www.loxone.com/help/weather-station-tree
Push on both side and
pull to open the top
Status LED
WH GN GND +24V
Push and pull
to unlock