Half-Height Device Bay Numbering - HP BladeSystem c7000 Quick Setup Instructions Manual

Hide thumbs Also See for BladeSystem c7000:

Table of Contents

Install the rear cage into the enclosure, close the hinges, and

tighten the thumbscrews.

Enclosure bay identification

Before installing front or rear components into the enclosure, review

enclosure bay numbering for each component.

Full-height device bay numbering

Half-height device bay numbering

Power supply bay numbering

Fan bay numbering

Installing the front components

CAUTION: To prevent improper cooling and thermal

damage, do not operate the enclosure unless all bays are

populated with a component or a blank.

Table of Contents

Do you have a question about the BladeSystem c7000 and is the answer not in the manual?