Cleaning And Care; Storage; Spare Parts And Other Accessories - Beem Schneid-FiXX User Manual

Schneid-FiXX

Cleaning and care

Before beginning work, pay attention to the
safety instructions in the section on safety!
Cleaning the appliance
Clean the appliance after each use.
Pull the plug out of the mains socket.
‹
Remove the grater as described in
‹
the section Inserting/removing the
grater.
WARNING
The slicers are very sharp!
► Only grip the grater at the plastic
parts.
Remove the attachment as described
‹
in the section Inserting/removing the
attachment.
Clean the drive unit (1) with a damp
‹
cloth.
Clean the other parts in hot water and
‹
a little washing up liquid.
NOTE
► With the exception of the drive
unit, all parts can be cleaned in
the dishwasher.
21

Storage

If you do not intend to use the appliance
for a longer period of time, clean it as de-
scribed in the Cleaning and care section.
To save space, the grating inserts can be
stored in the grating insert holder (13).
NOTE
► Only 4 grating inserts fit into the grat-
ing insert holder (13), the fifth grating
insert can be stored in the fixture (2).
Insert 4 grating inserts into the grating
‹
insert holder (13).
Close the grating insert holder with the
‹
pusher until it snaps in (see image E1).
Insert the pusher into the feed shaft
‹
(see image E2).
Attach the splash guard.
‹
Store the appliance and all accessory parts
at a dry, clean and frost-free location, which
is protected against direct sunlight.
Spare parts and
other accessories
Item* Article No .
6, 7, 14 900 690 001
5,013 900 690 011
8-12 900 690 031
* numbering according to the description of the ap-
pliance
BEEM - Elements of Lifestyle
EN
Designation
Spare parts set 1:
Mounting for grater
insert, splash
guard
Spare part set 2:
pusher, grater
insert holder
Grating insert set