Backup Configuration; Backup Configuration Using Ftp; Figure 19-1 Menu 24.5 Backup Configuration; Table 19-1 Filename Conventions - ZyXEL Communications ZyXEL ZyAIR B-1000 User Manual

ZyAIR Access Point Series User's Guide
FILE TYPE
Configuration File
Firmware

19.2 Backup Configuration

Option 5 from Menu 24 – System Maintenance allows you to backup the current ZyAIR configuration to
your computer. Backup is highly recommended once your ZyAIR is functioning properly. FTP is the
preferred method, although TFTP can also be used.
Please note that the terms "download" and "upload" are relative to the computer. Download means to
transfer from the ZyAIR to the computer, while upload means from your computer to the ZyAIR.

19.2.1 Backup Configuration Using FTP

Enter 5 in Menu 24 – System Maintenance to get the following screen.
To transfer the configuration file to your workstation, follow the
procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your router. Then type "root" and
SMT password as requested.
3. Locate the 'rom-0' file.
4. Type 'get rom-0' to back up the current router configuration to your
workstation.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on backup using TFTP (note that you must
remain in the menu to back up using TFTP), please see your router manual.
19-2

Table 19-1 Filename Conventions

INTERNAL EXTERNAL
NAME NAME
Rom-0 *.rom
Ras *.bin
Menu 24.5 – Backup Configuration
Press ENTER to Exit:

Figure 19-1 Menu 24.5 Backup Configuration

DESCRIPTION
This is the configuration filename on the ZyAIR.
Uploading the rom-0 file replaces the entire ROM file
system, including your ZyAIR configurations,
system-related data (including the default
password), the error log and the trace log.
This is the generic name for the ZyNOS firmware on
the ZyAIR.
Firmware and Configuraiton File Maintenance