Mac Filter Summary - ZyXEL Communications ZyXEL ZyAIR B-1000 User Manual

LABEL
Unicast WEP key
Key 1 or Key 2
Broadcast/Multicast WEP key
Key 3 or Key 4
Apply
Reset

7.3.2 MAC Filter Summary

If you select Multiple ESS in the Operating Mode field in the Wireless screen, the MAC Filter Summary
screen displays as shown when you click the MAC Filter tab.
Multiple ESS and VLAN
Table 7-2 Wireless : Edit ESS
Key 1 or key 2 is used to encrypt unicast transmissions.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
You must configure both keys, but only one key can be activated at any one
time. The default key is key 1.
Key 3 or key 4 is used to encrypt multicast/broadcast transmissions.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
You must configure both keys, but only one key can be activated at any one
time. The default key is key 3.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
ZyAIR Access Point Series User's Guide
DESCRIPTION
7-7