Advertisement
Important Safety Instructions:
Please read all instructions carefully before assembling.
For your safety, assembly by two or more adults is strongly recommended.
Keep instructions for future use.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the
structural integrity of the item.
Do not remove warning labels from the bunk bed. Labels are permanent and not designed to be removed.
Pre-assembly:
Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
Use the parts and hardware lists below to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split
wood.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
Parts Included:
(A) Upper Headboard/Footboard (2x)
(B) Side Rail (4x)
(C) Long guard rail (1x)
(D) Short guard rail (1x)
(E) Lower Headboard and Footboard (2x)
(F) Slat roll (2x)
(G) Ladder (1x)
Tools Required (not included):
Philips Head Screwdriver
Date: 2015-Nov-14
Rev:
A
D
G
C
E
B
F
E
F
C
A
Page 3 of 13
Advertisement
