MSW JETSTREAM INFLATOR HEAD Quick Start Manual

JETSTREAM INFLATOR HEAD INSTRUCTIONS
Thank you for your purchase! At MSW
accessories makes a good bike ride great.
The MSW Jetstream Inflator Head fits standard CO
you to vary the CO flow to avoid overfilling your tires.
2
WARNING: Cycling can be dangerous. Bicycle products should be
installed and serviced by a professional mechanic. Never modify your bicycle
or accessories. Read and follow all product instructions and warnings
including information on the manufacturer's website. Inspect your bicycle
before every ride. Always wear a helmet.
For additional product and safety information go to:
www.mswbike.com/safety.
COMPATIBILITY & INTENDED USE
The MSW Jetstream Inflator Head pushes on to Presta or threads onto
Schrader valve tubes, and works with standard 3/8" threaded compressed
CO cartridges.
2

USE INSTRUCTIONS

1. Close inflator head valve (fig. 1).
Figure 1
6400 WEST 105TH STREET // BLOOMINGTON, MN 55438 // 1-855-883-6563 // WWW.MSWBIKE.COM
82950 3/19 | 85-001070_INST_A
we believe having essential
®
cartridges and allows
2
2. Thread cartridge onto inflator head and tighten until cartridge
punctures (fig. 2).
3. Open the Presta valve and depress to release a short burst of air before
refilling with the inflator head (fig. 3).
4. Press Presta or thread Schrader inflator head onto tire valve and open
the inflator head valve (fig. 4).
5. Adjust the flow of the CO by twisting the valve knob.
2
Figure 2
Figure 4
Figure 3