Table of Contents
Advertisement
Quick Links
MINIAC GPS-333 CYCLING COMPUTER INSTRUCTIONS
Thank you for purchasing an MSW Miniac GPS-333 Cycling Computer!
Flash 3 Sec.
Thank you for your purchase! At MSW
Computer
accessories makes a good bike ride great. The 33-function Miniac GPS-333
Bracket
Cycling Computer is loaded with features that will add to any ride experience.
Rubber Pad
Take it along on every ride!
WARNING: Cycling can be dangerous. Bicycle products should be installed
and serviced by a professional mechanic. Never modify your bicycle
or accessories. Read and follow all product instructions and warnings including
information on the manufacturer's website. Inspect your bicycle before every
Rubber Pad
ride. Always wear a helmet.
For additional product and safety information go to: www.mswbike.com/safety.
COMPATIBILITY AND INTENDED USE
The MSW MINIAC GPS-333 function list includes: GPS Technology, Auto
Wake-Up, Backlight On/Off, Actual Temperature, Riding Data File Storage,
GPS - 333
Bracket
PC Link Connection, Device Battery Life Indicator, Button Sound, Clock, Trip
Time, Trip Distance, Total ODO, Speed Comparison, Current / Average /
Maximum Speed, Actual Altitude, Trip Altitude Gain / Loss, Total Altitude,
Maximum Altitude, Current / Average / Maximum Gradient.
FUNCTIONS AVAILABLE WITH ADDITIONAL BLE SENSORS NOT INCLUDED:
Current /Average / Maximum Cadence, Current / Average / Maximum Power,
Current / Average /Maximum Heart Rate, Maximum Pulse %.
The MSW Miniac GPS-333 is intended for use on roads and
paved trails as well as ASTM Condition 2 use. This includes
smooth paved roads, unpaved and gravel roads, and trails with
moderate grades where loss of contact with ground may occur
For off-road
riding and
jumps less than
6" (15cm)
but drops are less than 6" (15cm).
The Miniac GPS-333 head unit mounting bracket is compatible with most
handlebar diameters.
Flash 3 Sec.
INSTALLATION
ITEM CHECKLIST
These two tenons
have to be on the
left and right side
of the bracket.
Rubber Pad
These two tenons
have to be on the
left and right side
of the bracket.
Rubber Pad
Rubber Pad
Bracket
GPS - 333
HOW TO MOUNT THE BRACKET
GPS - 333
Bracket
Computer
GPS - 333
Use the rubber pad to tighten the bracket on the handlebar or stem with the
GPS - 333
Bracket
Bracket
rubber ties.
Rubber Pad
Computer
Bracket
Computer
Computer
Bracket
Rubber Pad
Bracket
Rubber Pad
Rubber Pad
6400 WEST 105TH STREET // BLOOMINGTON, MN 55438 // 1-855-883-6563 // WWW.MSWBIKE.COM
25658 2/18 | 85-000868_INST_D
Turn Off
we believe having essential
©
Bracket
Rubber Pad
Rubber Ties
These two tenons
have to be on the
left and right side
of the bracket.
Bands stretch around
the stem or bar
Micro USB Cable
Rubber Ties x 4
Flash 3 Seconds
Turn Off
These two tenons
have to be on the
left and right side
of the bracket.
These two tenons
These two tenons
have to be on the
have to be on the
left and right side
Rubber Pad
left and right side
of the bracket.
of the bracket.
Rubber Pad
Micro USB Cable
Rubber Ties x 4
Bracket
Micro USB Cable
Micro USB Cable
Bracket
Rubber Pad
Bracket
Micro USB Cable
Micro USB Cable
Rubber Ties x 4
Rubber Ties
Rubber Pad
Bracket
Rubber Pad
Rubber Pad
Rubber Ties
Flash 3 Seconds
Bands stretch around
the stem or bar
Bands stretch around
Bands stretch around
the stem or bar
the stem or bar
Bands stretch around
the stem or bar
ALT GAIN
ALT LOSS
Place the computer on the bracket and secure it by turning it clockwise.
COMPUTER MAIN DISPLAY
& BUTTON FUNCTION
TURN ON / OFF
Press RECORD button and MODE button for three seconds to turn on / off
the device.
GPS Indicator
Gradient / Temperature
Cadence / Altitude
Record Button
WAKE UP AND SLEEP
Rubber Ties x 4
Auto Wake Up: When there is any speed or vibration, the computer will wake up.
Auto Sleep: After six minutes without any speed or vibration, computer will
Rubber Ties x 4
go to sleep.
Rubber Ties x 4
MODE CHANGE
Press MODE button to change mode.
Bracket
Bracket
BIKE MODE
In Bike Mode, press SELECT button to change functions.
Rubber Ties
Rubber Ties
Rubber Pad
Bands stretch around
the stem or bar
Gradient
Maximum ALT
Computer
Rubber Pad
Bracket
Rubber Pad
Battery
Bands stretch around
the stem or bar
Functions
Rubber Ties
Total ALT
Bracket
Set Button
(located on
Rubber Ties
back of device)
Clock / Heart Rate / Power
Mode Button
Touch Button / Select Button / Enter
Gra
ALT GAIN
G
Advertisement
Table of Contents
Related Manuals for MSW Miniac GPS-333
Summary of Contents for MSW Miniac GPS-333
- Page 1 Thank you for your purchase! At MSW we believe having essential © Bracket Computer accessories makes a good bike ride great. The 33-function Miniac GPS-333 Rubber Pad Bracket Cycling Computer is loaded with features that will add to any ride experience. Rubber Pad...
- Page 2 MINIAC GPS-333 CYCLING COMPUTER INSTRUCTIONS CADENCE MODE Press RECORD button to scroll through options. In Cadence Mode, you will only see Average and Max cadence. Press MODE button to set option. Press MODE button again to move to set sensor.
- Page 3 MINIAC GPS-333 CYCLING COMPUTER INSTRUCTIONS SET UNIT Press SELECT button to enter options. Press RECORD button to scroll METRIC / IMPERIAL. Press SELECT button to move to temperature options. Press RECORD button to scroll C / F. Press MODE button to set option.
-
Page 4: Specifications
MINIAC GPS-333 CYCLING COMPUTER INSTRUCTIONS HOW TO CONNECT TO PC SOFTWARE SPECIFICATIONS Install the software on a Microsoft PC. Operating Temp 32–104°F (0–40°C) Insert the USB cable into the device and connect it to the computer’s USB port. Storage Temp 14–122°F (-10–50°C) - Page 5 (2) years from the original date of retail purchase by the consumer. This limited warranty is expressly limited to the repair or replacement of the original product, at the option of MSW, and is the sole remedy of the warranty. This limited warranty applies only to the original purchaser of the MSW product and is not transferable.
Need help?
Do you have a question about the Miniac GPS-333 and is the answer not in the manual?
Questions and answers
Hello, I believe I have the MSW GPS unit. I'm no longer able to "clear" the trip distance/trip time by pressing and holding the Mode button on the bottom right side. The unit "beeps" when the button is pressed, but the numbers won't clear. Everything else works as well as always. Thanks for any help
If the Mode button is not functioning properly, you may not be able to manually clear the trip distance and trip time using the usual method. However, you can try resetting the device by turning it off and on again by pressing and holding the RECORD and MODE buttons for three seconds. If the issue persists, check the device for physical damage or try reconnecting it to a PC using the included USB cable to see if you can reset or manage data through a software interface.
This answer is automatically generated