ZyXEL Communications ZyXEL PLA-407 User Manual page 78

Chapter 9 LEDs and Troubleshooting
The following table describes the behavior of the lights on the PLA-407.
Table 15 PLA-407 Lights
LIGHTS
POWER
HomePlug
ETHERNET
78
STATU
ICON COLOR
S
Green On
Blinking
Off
Green On
Amber
Red
Green/ Blinking
Amber/
Red
Off
Green On
Blinking
Off
DESCRIPTION
PLA-407
The is on and receiving power.
PLA-407
The is starting up.
PLA-407
It also indicates the
connect with another device using the ENCRYPT
function.
The encryption process failed (120 seconds time
out)
Blinking at the same time as the HomePlug light
indicates an unsuccessful connection if you have
used the ENCRYPT button.
The Power LED blinks when it is in Low Power
mode. Refer to Section 1.1.5 on page 18
details on this feature.
PLA-407
The is not receiving power.
PLA-407
The detects another Powerline
adapter. The data transfer rate is greater than
40 Mbps.
PLA-407
The detects another Powerline
adapter. The data transfer rate is between
12~20 Mbps.
PLA-407
The detects another Powerline
adapter. The data transfer rate is between 0~12
Mbps.
PLA-407
The is communicating with another
Powerline adapter. Data is being transmitted
and/or received.
Blinking at the same time as the POWER light
indicates an unsuccessful connection if you have
used the ENCRYPT button.
The HomePlug port does not detect another
Powerline adapter.
The ETHERNET port is on and ready and the
PLA-407
detects a device connected to it.
PLA-407
The is communicating with a
networking device connected to it.
PLA-407
The does not detect any devices
connected to its ETHERNET port.
is trying to
for
PLA-407 User's Guide