ExpWave 240B Secure Outdoor Ethernet Radio Link
VPN Level
None
Low
Medium
High
7.2 SMT 6.1 Menu in Router Mode
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.223.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
FIELD
DHCP
Client IP Pool
Starting Address
Size of Client IP
Pool
Primary DNS Server
Secondary DNS
Server
7-2
Table 7-2 VPN security level
Authentication
None
MD5
MD5
MD5
Menu 6.1 - ACx LAN DHCP Setup
Figure 7-2 AC LAN DHCP Setup
Table 7-3 AC LAN DHCP Setup Menu Fields
This field enables/disables the DHCP server.
If set to Server, your ExpWave will act as a DHCP server.
If set to None, the DHCP server will be disabled.
When set to Server, the following items need to be set:
This field specifies the first of the contiguous addresses in the
IP address pool.
This field specifies the size, or count, of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask. Leave these entries at 0.0.0.0 if they are
provided by an Internet DHCP server.
Encryption
None
None
DES
3DES
DESCRIPTION
First address
in the IP Pool
Size of the IP
Pool
IP addresses
of the DNS
servers
EXAMPLE
Server
(default)
192.168.1.33
32
Network Setup