Figure 5-3 Menu 3 - Lan Dhcp Setup; Figure 5-4 Menu 3.2 - Lan Dhcp Ethernet Setup; Table 5-3 Dhcp Ethernet Setup Menu Fields - ZyXEL Communications ZyXEL ExpWave 240B User Manual

ExpWave 240B Secure Outdoor Ethernet Radio Link
From menu 3, select the submenu option TCP/IP and DHCP Setup and press [ENTER]. The screen now displays
Menu 3.2 — TCP/IP and DHCP Ethernet Setup
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
DHCP Server Address= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
IP Policies= 2,7,9,11
Press ENTER to Confirm or ESC to Cancel:
Follow the instructions in the next table on how to configure the DHCP fields.
FIELD
DHCP
Configuration:
Client IP Pool
Starting
Address
Size of Client
IP Pool
Primary DNS
Server
Secondary
5-4
1. LAN Port Filter Setup
2. LAN DHCP Setup
Enter Menu Selection Number:

Figure 5-3 Menu 3 - LAN DHCP Setup

Version= RIP-1

Figure 5-4 Menu 3.2 - LAN DHCP Ethernet Setup

Table 5-3 DHCP Ethernet Setup Menu Fields

This field enables/disables the DHCP server.
If set to Server, your ExpWave will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay, the ExpWave acts as a surrogate DHCP server and relays
requests and responses between the remote server and the clients.
When set to Server, the following items need to be set:
This field specifies the first of the contiguous addresses in the IP address
pool.
This field specifies the size, or count of the IP address pool.
Type the IP addresses of the DNS servers. The DNS servers are passed
to the DHCP clients along with the IP address and the subnet mask.
Menu 3 - LAN Setup
,
as shown next.
DESCRIPTION
First address
in the IP Pool
Size of the IP
Pool
IP addresses
of the DNS
servers
EXAMPLE
Server
192.168.1.
33
32
Wireless Setup