Chapter 7 Network Setup; Introduction; Figure 7-1 Menu 6 - Router Mode Network Setup And Status; Table 7-1 Network Setup Field - ZyXEL Communications ZyXEL ExpWave 240B User Manual

Secure outdoor ethernet radio link

Hide thumbs

Table Of Contents

Table of Contents

This chapter describes how to configure the Network Setup using Menu 6 — Network Setup.

7.1 Introduction

From the main menu, enter 6 to open Menu 6 – Network Setup.

Ethernet (LAN) Setting:

Wireless (WLAN) Setting:

Press Space Bar to Toggle.

FIELD

Operation Mode

Device ID

Pre_Share Key

Ethernet (LAN) Setting

LAN IP

Network Mask

RIP Directio

RIP Version

DHCP Edit

Wireless (WLAN) Setting

MAC Address

VPN Security

AC1 & AC2 VPN

Security

The VPN security level parameters of authentication & encryption are described in Table 7-2:

Network Setup

Menu 6 - Router Mode Network Setup

Operation mode:

Device ID:

Pre_Share Key:

LAN IP:

Network Mask:

RIP Direction:

RIP Version:

DHCP Edit:

MAC Address:

VPN Security:

AC1&AC2 VPN Security:

Press ENTER to Confirm or ESC to Cancel:

Figure 7-1 Menu 6 - Router Mode Network Setup and Status

Table 7-1 Network Setup Field

Set AC Enable or Disable.

AP set to 1 , AC1 set to 2 , AC2 set to 3.

Set the key for AP to AC make authentication.

Enter the IP address of device lan port in dotted decimal notation.

Device will automatically calculate the subnet mask based on the IP

address that you assign. Unless you are implementing subnetting, use the

subnet mask computed by the Devie.

Press the [SPACE BAR] to select the RIP direction from Both/In

Only/Out Only/None.

Press the [SPACE BAR] to select the RIP version from

RIP-1/RIP-2B/RIP-2M.

Type space bar change Yes or No , if select Yes and enter SMT6.1.

Indicate the station with the same mac address will only be accepted to

join in.

Set security level (None, Low , Medium , High) for AP and AC conection

Set security level (None, Low , Medium , High) for AC1 and AC2

connection

ExpWave 240B Secure Outdoor Ethernet Radio Link