Parkside PESG 120 B4 Operation And Safety Notes page 9

PLEASE NOTE!
fThe use of the term 'product' or 'device'
in the following text refers to the PESG
120 B4 arc welder named in these
operating instructions.
This device may be used by
„ z
children aged 16 years and
older, and by persons with
reduced physical, sensory or
mental capacities, or a lack of
experience and knowledge,
if they are supervised or have
been instructed in how to use
the device safely and under-
stand the dangers that may
arise when using it. Do not
allow children to play with the
device. Cleaning and day-to-
day maintenance must not be
performed by children without
supervision.
Repairs and/or maintenance
„ z
work must only be carried out
by qualified electricians.
Only use the welding cables
„ z
(PESG 120 B4 H01N2-D1 x
10 mm²) included in the scope
of delivery.
During operation, the device
„ z
should not be positioned
directly on the wall, covered or
jammed between other devices
so that sufficient air can be
absorbed through the ventila-
tion slats.
Makes sure that the device
is correctly connected to the
supply voltage. Avoid any form
of tensile stress of the power
cable. Disconnect the plug from
the socket prior to setting up the
device in another location.
If the device is not in operation,
„ z
always switch it off by pressing
the ON/OFF switch. Place the
electrode holder on an insulated
surface and only remove it from
the holder after allowing it to
cool down for 15 minutes.
Pay attention to the condition
„ z
of the welding cable, electrode
holder and the earth terminal.
Wear and tear of the insulation
and the live parts can lead to
hazards and reduce the quality
of the welding work.
Arc welding creates sparks,
„ z
molten metal parts and smoke.
Therefore ensure that: All
flammable substances and/or
materials are removed from the
work station and its immediate
surrounding.
Ensure the work station is
„ z
ventilated.
Safety instructions
GB 9