Ip Related Ci Commands - ZyXEL Communications Prestige 642 User Manual

4.3.10 Device Related CI Commands
Device Dial Command
•
The device dial command initiates a PPPoE session. In the example shown next, remote node 1 is
initiated by typing:
P642ME-13> device dial 1
Start dialing for node <pppoe>...
### Hit any key to continue.###
$$$ DIALING dev=6 ch=0..........
$$$ OUTGOING-CALL phone(ffa)
$$$ CALL CONNECT speed<512000> type<6> chan<0>
$$$ LCP opened
$$$ CHAP login to remote OK
$$$ IPCP negotiation started
$$$ BCP stopped
$$$ BACP stopped
$$$ IPCP opened
Syntax:
P642ME-13>device dial [node#]
where [node#] is the remote node number.

4.3.11 IP Related CI Commands

CI COMMAND
ip Address
ip arp status
ip dhcp enif0 status
ip dns stats disp
ip icmp status
ip ifconfig
ip ping
Command Line Interface
Example
—
Table 4-9 IP Related CI Commands
PARAMETER(S)
[disp|clear]
<hostid>
Prestige 642 PPPoE Modem
DESCRIPTION
Display host IP address.
Display IP ARP (Address Resolution Protocol)
status.
Show DHCP configuration.
Display or clear DNS server information and
statistics.
Display ICMP status.
Display WAN/LAN interface information.
Ping an IP address or host.
4-13