Siemens VS08G Series Instructions For Use Manual page 31

Changing the dust bags and filters
Cleaning the motor protection filter
The motor protection filter should be cleaned regularly
by knocking out the dirt and rinsing.
Open the dust bag compartment lid.
Pull out the motor protection filter in the direction of
the arrow.
Clean the motor protection filter by tapping it.
If it is very dirty, the motor protection filter should be
rinsed.
The filter must then be left to dry for at least 24
hours.
After cleaning, insert the motor protection filter into
the appliance as far as it will go and close the dust
bag compartment lid.
You can obtain a new motor protection filter on
request as a spare part from the after-sales service.
Replacing the HEPA filter
The HEPA filter should be replaced once a year.
Press the locking tab in the direction of the arrow to
unlatch the exhaust grille and open it.
Release the Hepa filter by moving the locking lever in
the direction of the arrow and remove it from the
vacuum cleaner.
de en
33