Preparation; Name Of Each Part Of Projector - BOXLIGHT SP-9t User Manual

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT
FOCUS RING
ZOOM LEVER
BACK
TOP CONTROLS
AND INDICATORS
BOTTOM
AIR INTAKE VENTS
AND AIR FILTERS
LAMP COVER
INFRARED
REMOTE RECEIVER
PROJECTION LENS
LENS COVER
SPEAKER
EXHAUST VENTS
HOT AIR EXHAUSTED !
Air blown from Exhaust Vents is hot. When using or
installing projector, following precautions should be taken.
G Do not put any flammable object near these vents.
G Keep front grills at least 3'(1m) away from any object,
especially heat-sensitive object.
G Do not touch this area, especially screw and metallic part.
This area will become hot while a projector is used.
This projector detects internal temperature and
automatically controls operating power of Cooling Fans.
This projector is equipped with Cooling
Fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
G Do not cover vent slots.
G Keep back and bottom clear of any
POWER CORD CONNECTOR
TERMINALS
AND CONNECTORS
AIR INTAKE VENTS
(Back and Bottom)
object. Obstructions may block
cooling air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7