European Call Waiting; European Call Transfer - ZyXEL Communications P-2802H(W)(L)-I Series User Manual

Chapter 10 Voice
Table 54 European Flash Key Commands
COMMAND
Flash
Flash
Flash
Flash
10.11.2.1 European Call Hold
Call hold allows you to put a call (A) on hold by pressing the flash key.
If you have another call, press the flash key and then "2" to switch back and forth between
caller A and B by putting either one on hold.
Press the flash key and then "0" to disconnect the call presently on hold and keep the current
call on line.
Press the flash key and then "1" to disconnect the current call and resume the call on hold.
If you hang up the phone but a caller is still on hold, there will be a remind ring.

10.11.2.2 European Call Waiting

This allows you to place a call on hold while you answer another incoming call on the same
telephone (directory) number.
If there is a second call to a telephone number, you will hear a call waiting tone. Take one of
the following actions.
• Reject the second call.
Press the flash key and then press "0".
• Disconnect the first call and answer the second call.
Either press the flash key and press "1", or just hang up the phone and then answer the
phone after it rings.
• Put the first call on hold and answer the second call.
Press the flash key and then "2".

10.11.2.3 European Call Transfer

Do the following to transfer an incoming call (that you have answered) to another phone.
1 Press the flash key to put the caller on hold.
2 When you hear the dial tone, dial "*98#" followed by the number to which you want to
transfer the call. to operate the Intercom.
3 After you hear the ring signal or the second party answers it, hang up the phone.
10.11.2.4 European Three-Way Conference
Use the following steps to make three-way conference calls.
1 When you are on the phone talking to someone, press the flash key to put the caller on
hold and get a dial tone.
146
SUB-COMMAND DESCRIPTION
1 Disconnect the current phone connection and answer the
incoming call or resume with caller presently on hold.
2 1. Switch back and forth between two calls.
2. Put a current call on hold to answer an incoming call.
3. Separate the current three-way conference call into two
individual calls (one is on-line, the other is on hold).
3 Create three-way conference connection.
*98# Transfer the call to another phone.
P-2802H(W)(L)-I Series User's Guide