Initial Use - auna Silver Star 10033125 Manual

EN
16

INITIAL USE

Before operation
• Before operation, please make sure that VOLTAGE mentioned on the
power supply is same as the voltage of your local area.
• Use the supplied mains adaptor to connect the device to a household
mains socket.
Basic operation-getting started
1. Connect the mains adaptor to the DC jack, fully extend the telescopic
antenna, plug in and switch on at the mains.
2. The display backlight will illuminate for a few seconds, a welcome
message "Welcome" will appear in the display briefly and the clock
(00:00:00) will flash in the display.
3. To switch your radio between FM, BT, CD, USB and Aux in mode,
press Mode button repeatedly.
4. Press and hold the Power/Mode button will go into 'Standby' mode.