Edit Ip; Figure 26-4 Menu 11.3: Remote Node Network Layer Options For Ethernet Encapsulation; Table 26-4 Remote Node Network Layer Options Menu Fields - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

26.3 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER]
to open Menu 11.3 - Network Layer Options.

Figure 26-4 Menu 11.3: Remote Node Network Layer Options for Ethernet Encapsulation

This menu displays the My WAN Addr field for PPPoE and PPTP encapsulations and Gateway IP Addr
field for Ethernet encapsulation. The following table describes the fields in this screen.

Table 26-4 Remote Node Network Layer Options Menu Fields

FIELD
IP Address If your ISP did not assign you an explicit IP address, press [SPACE BAR]
Assignment and then [ENTER] to select Dynamic; otherwise select Static and enter
the IP address & subnet mask in the following fields.
(Rem) IP If you have a Static IP Assignment, enter the IP address assigned to you
Address by your ISP.
(Rem) IP If you have a Static IP Assignment, enter the subnet mask assigned to
Subnet Mask you.
This field is applicable to Ethernet encapsulation only. Enter the gateway
Gateway IP
Addr IP address assigned to you if you are using a static IP address.
Remote Node Setup
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Addr= N/A
Network Address Translation= SUA Only
Metric= 1
Private=
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
DESCRIPTION
ZyWALL 2 Series User's Guide
EXAMPLE
Dynamic
(default)
26-7