Editing Tcp/Ip Options; Figure 23-7 Menu 11.3: Remote Node Network Layer Options; Table 23-6 Menu 11.3: Remote Node Network Layer Options - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

23.7 Editing TCP/IP Options

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER]
to open Menu 11.3 - Remote Node Network Layer Options.

Figure 23-7 Menu 11.3: Remote Node Network Layer Options

The following table describes the fields in this menu.

Table 23-6 Menu 11.3: Remote Node Network Layer Options

FIELD
Rem IP Leave this field set to 0.0.0.0 to have the ISP or other remote router
Address dynamically (automatically) send its IP address if you do not know it. Enter
the remote gateway's IP address here if you know it (static).
Rem Subnet Leave this field set to 0.0.0.0 to have the ISP or other remote router
Mask dynamically send its subnet mask if you do not know it. Enter the remote
gateway's subnet mask here if you know it (static).
My WAN Leave the field set to 0.0.0.0 to have the ISP or other remote router
Addr dynamically (automatically) assign your WAN IP address if you do not
know it. Enter your WAN IP address here if you know it (static).
This is the address assigned to your local ZyWALL, not the remote router.
WAN and Dial Backup Setup
Menu 11.3 - Remote Node Network Layer Options
Rem IP Addr= 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Network Address Translation= SUA Only
Metric= 15
Private= No
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
DESCRIPTION
ZyWALL 2 Series User's Guide
EXAMPLE
(default)
(default)
(default)
0.0.0.0
0.0.0.0
0.0.0.0
23-9