Wpa-Psk/Wpa2-Psk; Figure 31 Station Mode: Security Setting: Wpa-Psk/Wpa2-Psk - ZyXEL Communications G-220 v3 User Manual

Table 6 Station Mode: Security Setting: WEP (continued)
LABEL
Key x (where x is a
number between 1
and 4)
Back
Next
Exit

4.3.1.2 WPA-PSK/WPA2-PSK

Figure 31 Station Mode: Security Setting: WPA-PSK/WPA2-PSK

Chapter 4 Wireless Station Mode Configuration
DESCRIPTION
Select this option if you want to manually enter the WEP keys. Enter the WEP key
in the field provided.
If you select 64 Bits in the WEP field.
Enter either 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 11AA22BB33) for HEX key type.
or
Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey) for ASCII key type.
If you select 128 Bits in the WEP field,
Enter either 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey12345678) for ASCII key type.
If you select 256 Bits in the WEP field,
Enter either 58 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example,
0000111122223333444455556666777788889999AAAABBBBCCCC000011)
for HEX key type
or
Enter 29 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey111122223333444455556678) for ASCII key type.
Note: The values for the WEP keys must be set up exactly the
same on all wireless devices in the same wireless LAN.
ASCII WEP keys are case sensitive.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 4.3.2 on page
Click Exit to return to the Site Survey screen without saving.
ZyXEL G-220 v3 User's Guide
61.
57