V3 Hardware And Utility Installation; Zyxel Utility Icon; Configuration Methods; Enabling Wzc - ZyXEL Communications G-220 v3 User Manual

ZyXEL G-220 v3 User's Guide
1.3 G-220 v3 Hardware and Utility Installation
Follow the instructions in the Quick Start Guide to install the ZyXEL utility and make
hardware connections.

1.3.1 ZyXEL Utility Icon

After you install and start the ZyXEL utility, an icon for the ZyXEL utility appears in the
system tray.
Note: The ZyXEL utility system tray icon displays only when the G-220 v3 is installed
properly. When you use the ZyXEL utility, it automatically disables WZC.

Figure 5 ZyXEL Utility: System Tray Icon

The color of the ZyXEL utility system tray icon indicates the status of the G-220 v3. Refer to
the following table for details.

Table 1 ZyXEL Utility: System Tray Icon

COLOR
Red
Green
Pale Blue

1.4 Configuration Methods

To configure your G-220 v3, use one of the following applications:
• Wireless Zero Configuration (WZC) (the Windows XP wireless configuration tool)
• ZyXEL Utility (required when you want to use the G-220 v3 as an access point)
• Odyssey Client Manager (not supplied)
Refer to the Odyssey Client Manager documentation for more information.
Note: Do NOT use WZC or the Odyssey Client Manager at the same time you use the
ZyXEL utility.

1.4.1 Enabling WZC

Note: When you use the ZyXEL utility, it automatically disables WZC.
26
DESCRIPTION
The G-220 v3 is operating in wireless station mode but is not connected to a wireless
network.
The G-220 v3 is operating in wireless station mode and connected to a wireless network.
The G-220 v3 is operating in access point mode.
Chapter 1 Getting Started