Do you have a question about the LTV-WR1 and is the answer not in the manual?
Questions and answers
Steve wilkins
March 29, 2025
My LTVWR1 continues to stop transmitting. I have cleaned the battery contacts and have installed multiple batteries. The red light no longer appears upon battery install. There is moisture in the solar panel. This is my second unit and I have a third if needed but I would like this one to work if possible
1 comments:
Mr. Anderson
March 29, 2025
The La Crosse Technology LTV-WR1 may stop transmitting due to radio frequency interference, battery issues, or improper installation. To fix this:
1. Check Batteries: Ensure batteries are fresh and correctly installed. 2. Avoid Interference: Reorient or relocate the receiving antenna; increase the distance between the sensor and other electronic devices. 3. Change Power Source: Plug the receiver into a different electrical circuit. 4. Mount Properly: Use the bubble level and mounting bracket for correct positioning. 5. Maintain Clear Signal Path: Ensure no obstacles block the wireless signal (range is over 400 feet in open air).
If problems persist, consult a technician.
This answer is automatically generated
Robert c Herr
March 17, 2025
I need replacement wind directional indicator
1 comments:
Mr. Anderson
March 17, 2025
You can obtain a replacement wind directional indicator for the La Crosse Technology LTV-WR1 by purchasing the WVTX231RW Wind Vane, which is listed as a separate part.
Summary of Contents for La Crosse Technology LTV-WR1
Page 1
• Wind direction • Wind speed • Rainfall • Solar Panel for extended battery life • Replaceable directional vane • Replaceable wind cups • Self-emptying rain sensor Model: LTV-WR1 DC: 083117 Power Directional 1- Insert 3-AA batteries Vane according to polarity. Wind...
Page 2
Mounting • Mount in an open area clear for 50 feet in all directions. Bubble • Mount with the solar panel facing south, so the wind direction is Level correct. See the letters N, S, E W, embossed on the top of the sensor. •...
Page 3
Sensor ID Standalone or Connected station: Your sensor has a bar code and ID number. This ID number locks your sensor into your station. Follow the instructions in your station manual to delete the sensor ID for sensor replacement. La Crosse View™ compatible system: The sensor ID and bar code are recognized by the La Crosse View™...
Page 4
• Dimensions: 13.62” W x 13” H x 5.16” D in (345.95 x 330.20 x 131.06 mm) Warranty and Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship.
Need help?
Do you have a question about the LTV-WR1 and is the answer not in the manual?
Questions and answers
My LTVWR1 continues to stop transmitting. I have cleaned the battery contacts and have installed multiple batteries. The red light no longer appears upon battery install. There is moisture in the solar panel. This is my second unit and I have a third if needed but I would like this one to work if possible
The La Crosse Technology LTV-WR1 may stop transmitting due to radio frequency interference, battery issues, or improper installation. To fix this:
1. Check Batteries: Ensure batteries are fresh and correctly installed.
2. Avoid Interference: Reorient or relocate the receiving antenna; increase the distance between the sensor and other electronic devices.
3. Change Power Source: Plug the receiver into a different electrical circuit.
4. Mount Properly: Use the bubble level and mounting bracket for correct positioning.
5. Maintain Clear Signal Path: Ensure no obstacles block the wireless signal (range is over 400 feet in open air).
If problems persist, consult a technician.
This answer is automatically generated
I need replacement wind directional indicator
You can obtain a replacement wind directional indicator for the La Crosse Technology LTV-WR1 by purchasing the WVTX231RW Wind Vane, which is listed as a separate part.
This answer is automatically generated