Configuration And Set-Up - Telecom Behnke 20-2907A-IP Instructions Manual

Behnke IP camera
GB GB
Camera access via a browser

3.5. Configuration and Set-up

Requires administrator authorization.
On this page, entitled "Configuration", you can
access and change general network settings for
your camera. By default, your camera is set to
make use of the dynamic IP protocol (DHCP).
The entry fields for an IP address, the gateway,
the subnet mask and the DNS server are con-
sequently deactivated and cannot be changed
manually. The static IP function is reserved for
the manufacturer for service purposes. Where
you want to use your proprietary NTP server,
please enter the corresponding data to the field
56
"NTP server". The fields MAC (serial number)
and camera name only serve information
purposes and are consequently greyed out at
all times. To save the changes made, please
click "Send"; use "Cancel" to leave this page. All
changes not yet confirmed will be lost.
This function is only available to the manu-
facturer for service purposes
www.behnke-online.com